Electrical & Automation – Thiết Bị Điện Tự Động Hóa
S100 I/O for Advant Master DCS
ABB S100 I/O for Advant Master DCS, a racked-based I/O system for Advant Controller 410 and Advant Controller 450.
The S100 I/O system is available for the Advant Controller 400 Series. The S100 direct I/O system consists of I/O modules with 4 to 32 channels, depending on type, which are placed in the I/O subracks.
S100 I/O consists of one or more I/O racks with several I/O boards, connection units and cables covering a wide variety of applications and specific needs. The I/O boards are divided into groups, depending on their function. Within each group, there are several I/O boards with differing functionality and complexity.
The Advant Controller 410 includes an integral S100 I/O rack, while the Advant Controller 450 interfaces up to five S100 I/O sub-racks through a single or redundant interface module and cables. Optical modems enable remote location of S100 I/O sub-racks.
Variants are also available for integration of Intrinsic Safety Modules as well as HART Multiplexers.
S100 I/O life cycle status
S100 I/O is in the Active life cycle phase and is planned to stay as such until minimum 2020, with guaranteed parts support until minimum 2030.
The range of S100 I/O modules is complete, consisting of general- purpose binary and analog inputs and outputs and special interfaces for special tasks. S100 I/O is connected to the controller via a bus extension cable (max. length 12 m (39 ft.). The optical bus extension available, makes it possible to distribute the I/O up to 500 m (1640 ft). For increased availability the extension cable can be redundant.