English
NORGREN Valve with Stepper Motor
Description
Motorised valves are used in applications where precise control and adjustment of the output is required. In automated production systems, a motorised valve acts as the interface between the electric and fluidic circuits.
It is a proportional or modulating valve with two ceramic discs that rotate through an angle of 90 ̊, proportional to the input signal. Depending on the application and accuracy required, it is possible to choose between an extremely wide variety of control elements and drive options. They only consume power when driving to position and are compatible with a variety of gases, liquids as well as contaminated fluids.
Brass Motorised Valve, G1/2
Item: 8288200.9668.02400
•Low power consumption
•Wear-resistant ceramic rotary action sliding plate
•Valve remains on last setting if power lost
•Will handle contaminated fluids
- Operation: 2/2 Motorised
- Port size: G1/2
- Voltage: 24Vdc
- Function: Throttle Position With Zero Closure
- Coil code: 9668
Technical Details
Medium: Neutral gases and liquids
Port size: G1/2
Orifice: 15.0
Operation: 2/2 Motorised
Function: Throttle Position With Zero Closure
Voltage: 24Vdc
Operating pressure: -0.9 … 16 bar
Operating temperature: -10 … 40 °C
Operating temperature (fluid): -10 … 90 °C
Maximum operating pressure: 16 bar
Maximum fluid temperature: 90 °C
Protection class: EN 60529 IP54
Motor Type: Stepping Motor
Air Flow: 484.0 Nl/min
Material – Body: Brass
Material – Seat seal: NBR
Coil code: 9668
Range: 82880
CTI SUPPLY chuyên cung cấp và hỗ trợ tìm kiếm các loại thiết bị, linh kiện công nghiệp theo yêu cầu với chi phí hợp lý.
Liên hệ CTI Supply theo Hotline: 0906494486 hoặc email: [email protected] để được tư vấn và báo giá trong thời gian sớm nhất.
